- Conexant usb modem driver fu 02 serial#
- Conexant usb modem driver fu 02 driver#
- Conexant usb modem driver fu 02 archive#
- Conexant usb modem driver fu 02 Patch#
The following for normal 22b8:2a70 mode including the related qmi_wwan
Conexant usb modem driver fu 02 Patch#
Those can be added as they getĪfter this patch the output of /sys/kernel/debug/usb/devices has I've notĪdded the other devices listed in moto_flashqsc.c in case they really I've added droid 4 modem flashing mode to the option driver.
Conexant usb modem driver fu 02 driver#
I've verified that flashing the modem with signed firmware works justįine with the option driver after manually toggling the GPIO pins, so Port->bulk_out_size to 8K from the default. Linux kernel driver moto_flashqsc.c just seems to change the Then for the class 0x0a (CDC Data) mode, the Motorola Mapphone Android Have any mdm9600 based devices, so I have only tested these on Motorola Mapphone Android Linux kernel mdm6600_id_table. The UARTs added with this change are the same product IDs as the Support, and no PM support compared to the TS 27.010 based UART The voice modem AT-capable port seems to provide only partial The modem and to configure it's NVRAM and seems to work just fineīased on a quick test with a minimal tcmdrw tool I wrote. The TCMD port seems to be a Motorola custom protocol for testing NVRAM settings may need changing for that. It might be just a NVRAM setting somewhere, but I have no idea what To enable the MUX or NMEA ports, it seems that something needs to beĭone additionally to enable them, maybe via the DIAG or TCMD port. ModemManager already can manage dataĬonnection using the USB QMI ports that are already handled by the It's only used for debugging with ModemManager -debug for sendingĬustom AT commands though. The ttyUSB0 is detected as QCDM capable by ModemManager. So I've added that too with more details below as it However, looking at the Motorola mapphone kernel code, the mdm6600 0x0aĬlass is only used for flashing the modem firmware, and there are no The ff/ff/ff interfaces seem to always be UARTs on Motorola devices.įor the other interfaces, class 0x0a (CDC Data) should not in generalīe added as they are typically part of a multi-interface function as With lsusb -v, we should use option.c instead of qcaux.c as pointed out
Conexant usb modem driver fu 02 serial#
So we should use qcaux.c or option.c as noted byĪs the Motorola USB serial ports have an interrupt endpoint as shown That do not use the same layout as Gobi 1K/2K/etc devices listed in On Motorola Mapphone devices such as Droid 4 there are five USB ports
Conexant usb modem driver fu 02 archive#
USB: serial: option: Add Motorola modem UARTs - Greg Kroah-Hartman archive mirror help / color / mirror / Atom feed From: Greg Kroah-Hartman